| Design conditions | | | | | | | | | | | | | |
| | Standard: | -10 ... +50 °C | | • | • | • | | | • | • | | | |
| | with heater: | -40 ... +50 °C | | | | | • | • | | | • | • | |
| | | | | | | | | | | | | | |
| Specifications | | | | | | | | | | | | | |
| | Max measuring distance on natural surfaces | m | | 30 | 65 | 65 | 65 | 65 | 65 | 65 | 65 | 65 | |
| | Max measuring range on reflective foil | m | | - | 150 | 150 | 150 | 150 | 500 | 500 | 500 | 500 | |
| | typical accuracy @2σ | ± mm | | 3 | <3 | <1.5 | <3 | <1.5 | <3 | <1 | <3 | <1 | |
| | Repeatability typ. | ± mm | | <1.5 | <0.5 | <0.4 | <0.5 | <0.4 | <0.5 | <0.3 | <0.5 | <0.3 | |
| | max measuring rate in Hz | Hz | | 3 | 6 | 6 | 6 | 6 | 200* | 200* | 200* | 200* | |
| | Housing IP65 | | | • | • | • | • | • | • | • | • | • | |
| | Power Supply | 24 … 30 VDC | | • | | | • | • | | | • | • | |
| | | 9 … 30 VDC | | | • | • | | | • | • | | | |
| | Laser | red visible | | • | • | • | • | • | • | • | • | • | |
| | | | | | | | | | | | | | | | |
| | Diameter laser dot | | | | | | | | | | | | |
| | – at 10 m | 8 mm | | • | • | • | • | • | • | • | • | • | |
| | – at 50 m | 25 mm | | • | • | • | • | • | • | • | • | • | |
| | – at 100 m | 40 mm | | | • | • | • | • | • | • | • | • | |
| | Dimensions | 106 x 62 x 45 mm | | • | | | | | | | | | |
| | | | | 150 x 80 x 55 mm | | | • | • | • | • | • | • | • | • | |
| | Weight | g | | 280 | 690 | 690 | 720 | 720 | 690 | 690 | 720 | 720 | |
| | | | | | | | | | | | | | | | |
| Interfaces | | | | | | | | | | | | | |
| | Analog output programmable | 0/4 … 20 mA | | • | • | • | • | • | • | • | • | • | |
| | max. error analog output | ±% progr. span | | 0.3 | 0.2 | 0.2 | 0.2 | 0.2 | 0.1 | 0.1 | 0.1 | 0.1 | |
| | 2 Digital outputs programmable | Open Drain | | | • | • | • | • | • | • | • | • | |
| | 1 Digital output error display | Open Drain | | | • | • | • | • | • | • | • | • | |
| | 1 Digital input (programmable instead of DO1) | | | | • | • | • | • | • | • | • | • | |
| | RS-232 serial | | | | • | • | • | • | • | • | • | • | |
| | RS-422 seral | | | | • | • | • | • | • | • | • | • | |
| | ID-Switch 0 … 9 | | | | • | • | • | • | • | • | • | • | |
| | Profibus ( extern ) | | | | • | • | • | • | • | • | • | • | |
| | SSI | | | | | | | | • | • | • | • | |
| | | | | | | | | | | | | | | | |
| Connection | | | | | | | | | | | | |
| | 5 pin M12 Connector | | | • | | | | | | | | | |
| | 15 pin D-Sub Connector | | | | • | • | • | • | • | • | • | • | |
| | Internal screw terminal | | | | • | • | • | • | • | • | • | • | |
| | | | | | | | | | | | | | | | |
| Features | | | | | | | | | | | | |
| | Auto start | | | • | • | • | • | • | • | • | • | • | |
| | Direct connectivity of an external remote display | | | | • | • | • | • | • | • | • | • | |
| | External trigger for measurements | | | | • | • | • | • | • | • | • | • | |
| | Synchronized measuring of several devices | | | | • | • | • | • | • | • | • | • | |
| | | | | | | | | | | | | | | | |
| * | Valid for software version > 5.00 (depending on configuration) | | | | | | | | | | | | |